Spare parts and accessories

There are many items that are used during the building of the N-Drive ranges that may be useful to scratch-builders or those wishing to add detail to their models and these are now being made available, if there is something that you are looking for that I have yet to list please contact me to see if I can add it to this section. UK post and packing is £2.00 per order or FOC if included with an order for other products.

​

N-Drive 1015 12v DC motor. These come with a sleeve to convert

              the shaft from 1.0 to 1.5mm diameter and two M1.4 x 2mm

              mounting screws. The shaft on the threaded hole end is

              approx 4.0mm and at the connector end it is 8.0mm long               £8.00

​

Motor mounting screws M1.4 x 2mm flat head. Pack of 6                              £3.00

​

Flywheels brass 9.4mm diameter

               1.0mm bore     4.6, 6 or 8mm wide                                                  £2.50

               1.5mm bore     4.6, 6 or 8mm wide                                                  £2.50

​

Adapter sleeve      1.0mm to 1.5mm, approx 8.0mm long                              £1.25

​

Bachmann muff gears - to fit the Dockside 0-4-0 and some 0-6-0's,

                   please check before ordering, made from Delrin                      £2.75 per gear

​

Bogie/pony truck etch - a simple nickel silver etch to allow a truck

                  to be fitted in most situations c/w fixing screw. Suitable

                  wheel-sets can be supplied, please ask for details                       £2.75

​

Fine link chain (40 links per inch) 300mm long (NL31)                                    £4.20

                 

​

​